110VAC Input 5V 40A 200W Switching Power Supply for LED Display

• Usage: Digital Products
• Output Type: Single
• Driving Method: LED Regulator Voltage
• Circuit Structure: Electronic Step-down Transformer
• Certification: CE, RoHS
• Power Supply Mode: Constant Current Source
• Modulation System: PFAW
• In-Out: Step-down Type
• Power Supply Voltage: 200-240VAC
• Pack Sealing Size: SMD
• Brand: G-Energy
• Transport Package: Carton Box
• Specification: 215x115
• Trademark: Meanwell
• Origin: Shenzhen
• Production Capacity: 100000PCS/Month

Product Description

Products Description:

Feature:

•  High efficiency up to 89%

•  Protections: Short circuit/ Overload / Over voltage / Over current

•  Cooling by free air convection

•  Built-in the IC imported from ON Semiconductor and Texas Instrument

•  100% full load burn-in test

•  3 years warranty

SPECIFICATION:

MODEL		YY-D-200-5 V-G4
OUTPUT	DC VOLTAGE	5V
	RATED CURRENT	40A
	CURRENT RANGE	0~40A
	RATED POWER	200W
	RIPPLE & NOISE (max.)  Noto.2	100mVp-p
	VOLTAGE ADJ. RANGE	4.15~5.5V
	VOLTAGE TOLERANCE   Noto.3	±1.0%
	LINE REGULATION	± 0.3%
	LOAD REGULATION	± 0.5%
	SETUP, RISE TIME	500ms, 100ms
	HOLD UP TIME CTyp-)	10ms
INPUT	VOLTAGE RANGE             Noto.4	165Vac-275Vac
	FREQUENCY RANGE	47-63Hz
	EFFICIENCY fTyp.)	89%
	AC CURRENT (Typ.)	1.1A/230VAC
	INRUSH CURRENT (TVp.)	40A/230VAC
	LEAKAGE CURRENT	<1mA/240VAC
PROTECTION	OVERLOAD	105 -135% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	OVERVOLTAGE	5.5~6.5V
		Protection type: Shutdown o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-30 ~ +70nC (Referto "Derating Curve")
	WORKING HUMIDITY	20~90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40~+85°C,10~95%RH
	TEMP. COEFFICIENT	±0.03%/°C (0~50°C)
	VIBRATION	10- 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	GB4943, UL60950, EN60950
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC/3mA/1min
		I/P-FG:1.5KVAC/3mA/1min
		O/P-FG:0.5KVAC/3mA/1min
	ISOLATION RESISTANCE	I/P-O/P:100MΩmin/500VDC
	CERTIFICATIONS	CQC/ CE/ CB/ ROHS/ CCC/ BIS
	DIMENSION	190*82*31mm(L*W*H)
NOTE	1. The product should be suspended in air or placed on the face of metal when assembled, and be avoided placed on the face of non-conducting heat materials such as plastics, boards, and so on.                         2. Storage: It will be better if the product is stored in an environment temperature between        -10ºC and +80ºC as well as a humidity of less than 80%RH. Make sure that there are no corrosive gases in the store environment. Besides, the surrounding must not have strong mechanical vibration and high-intensity magnetic field. And the case has to be blocked up at least 25cm away from the earth. The regulation mentioned above will let the products store for 2 years, power supply should be tested after 2 years.