Connector |
Connector Name |
Description |
Input |
DVI IN |
Single-link DVI connector |
Custom resolutions supported: |
Maximum width: 3840 pixels |
Maximum height: 2560 pixels |
Supported standard resolutions: |
1024×768@(24/30/48/50/60/72/75/85/100/120)Hz |
1280×1024@(24/30/48/50/60/72/75/85)Hz |
1366×768@(24/30/48/50/60/72/75/85/100)Hz |
1440×900@(24/30/48/50/60/72/75/85)Hz |
1600×1200@(24/30/48/50/60)Hz |
1920×1080@(24/30/48/50/60)Hz |
1920×1200@(24/30/48/50/60)Hz |
2560×960@(24/30/48/50)Hz |
2560×1600@(24/30)Hz |
HDMI IN |
HDMI 1.4a compliant |
HDCP 1.4 compliant |
Custom resolutions supported: |
Maximum width: 3840 pixels |
Maximum height: 2560 pixels |
Supported standard resolutions: |
1024×768@(24/30/48/50/60/72/75/85/100/120)Hz |
1280×1024@(24/30/48/50/60/72/75/85)Hz |
1366×768@(24/30/48/50/60/72/75/85/100)Hz |
1440×900@(24/30/48/50/60/72/75/85)Hz |
1600×1200@(24/30/48/50/60)Hz |
1920×1080@(24/30/48/50/60)Hz |
1920×1200@(24/30/48/50/60)Hz |
2560×960@(24/30/48/50)Hz |
2560×1600@(24/30)Hz |
3G-SDI IN |
SMPTE ST 425-1 Level A & B, SMPTE ST 274, ST 296, ST 295 compliant |
Maximum supported input resolution: 1920×1080@60Hz |
Note: 3G-SDI input sources do not support input resolution and color depth settings. |
Output |
RJ45 × 6 |
6 Gigabit Ethernet ports |
Maximum loading capacity of a single Ethernet port: |
For 8-bit input sources: 650,000 pixels |
For 10-bit/12-bit input sources: 320,000 pixels |
Support redundancy between Ethernet ports. |
OPT1 |
10G optical ports |
OPT2 |
Single-mode twin-core fiber: Support LC optical connectors; wavelength: 1310 nm; transmission distance: 10 km; OS1/OS2 recommended. |
|
Dual-mode twin-core fiber: Support LC optical connectors; wavelength: 850 nm; transmission distance: 300 m; OM3/OM4 recommended. |
|
The maximum loading capacity of a single optical port equals to that of all the 6 Ethernet ports. |
|
2 OPT inputs/outputs |
|
The OPT1 works as the primary input or output port, and the 6 Gigabit Ethernet ports work as the corresponding output or input ports. |
|
The OPT2 works as the backup input or output port of OPT1. |
|
In the sending card mode, both OPT ports and 6 Gigabit Ethernet ports can work as output ports to output the same image. |
|
In the fiber converter mode, when the OPT ports work as the input ports, the 6 Gigabit Ethernet ports work as output ports. When the 6 Gigabit Ethernet ports work as input ports, the OPT ports work as output ports. |
DVI LOOP |
DVI loop output |
HDMI LOOP |
HDMI loop output |
Support HDCP 1.3 loop output encryption. |
3G-SDI LOOP |
SDI loop output |
MONITOR |
HDMI |
Connect to a monitor to monitor the inputs. The output resolution of this connector is 1920×1080@60Hz (fixed output with a width of 1920 pixels and height of 1080 pixels). |
If the input resolution exceeds the monitor resolution, the input will be automatically scaled in proportion and then displayed on the monitor starting from its top left. |
Control |
GENLOCK IN |
GENLOCK input connector |
Genlock type: Blackburst |
Input Genlock sync signal to ensure synchronization and same refresh rate between the output signals of cascaded MCTRL660 PRO units and the external Genlock input signal. |
GENLOCK LOOP |
Genlock loop output connector. Up to 8 MCTRL660 PRO units can be cascaded. |
ETHERNET |
Fast Ethernet port, which connects to PC and supports TCP/IP |
USB IN |
Input port for cascading devices, or connecting to PC |
USB OUT |
Output port for cascading devices. Up to 8 MCTRL660 PRO units can be cascaded. |
Power supply |
100 V-240 V AC |
Power switch |
ON/OFF |